FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ MCE-202(MultiNA) ]

21-30 of Total 31

≪ 3 / 4page ≫

  • (MCE) Chip Cleaning

    1. Dispense chip cleaning solution into the buffer bottle. NOTE: The required volume of chip cleaning solution varies depending on conditions such as the n... Show Detail

    • No：8341
    • Date of Issue：2022/02/15 15:00
    • Brached FAQ

  • (MCE) Inspecting and Washing Microchip Reservoirs (manually)

    « Purpose» To manually clean the microchip channels and surface and confirm that the channels are unobstructed. « Guidelines for Procedure» •... Show Detail

    • No：8340
    • Date of Issue：2022/02/15 14:34

  • (MCE) Chip Wash and Probe Rinse

    Select the following items from the [Wash] menu, and perform each rinsing operation. • Chip 1 to Chip 4 Washing:Rinse each microchip with water. The n... Show Detail

    • No：8335
    • Date of Issue：2022/02/15 13:09

  • (MCE) Maintenance of Chip Stage and Objective Lens

    « Purpose» To clean the chip stage and objective lens. If there is any adhered substance, it may reduce the detection sensitivity. « Guideline... Show Detail

    • No：8338
    • Date of Issue：2022/02/15 11:54

  • (MCE) Maintenance of Sample (Extra Sample) Stand

    « Guidelines for Procedure» When adhered substances are present on the sample stand or extra sample stand. « Requirements» • Wipes • Milli... Show Detail

    • No：8332
    • Date of Issue：2022/02/15 11:54

  • (MCE) Maintenance of Chip Cover

    « Purpose» To remove any precipitate adhering to the electrode pins on the chip cover and verify that the electrodepins are not bent and the chip pressin... Show Detail

    • No：8330
    • Date of Issue：2022/02/15 11:54
    • Last Updated：2022/02/15 12:53

  • (MCE) Maintenance of Air Cylinder Seal

    « Purpose» To remove any substances adhered to the air cylinder seal. Salt or other substances adhered to the air cylinder seal will reduce the efficie... Show Detail

    • No：8328
    • Date of Issue：2022/02/15 11:54

  • (MCE) Maintenance of Sample Probe and Aspirator

    « Purpose» To remove any substances adhered to the tips of the sample probe and aspirator. Adhered substances may cause the sample probe and aspirator ... Show Detail

    • No：8326
    • Date of Issue：2022/02/15 11:54

  • (MCE) Maintenance of Piercing Needle

    « Purpose» To remove any substances adhered to the tip of the piercing needle. Adhered substances may prevent the needle from piercing the aluminum sea... Show Detail

    • No：8324
    • Date of Issue：2022/02/15 11:54

  • (MCE) Moving All Axes to Home Position

    When performing inspection and maintenance work, turn ON power to both the instrument and the PC,verify that a connection has been established, and then move... Show Detail

    • No：8322
    • Date of Issue：2022/02/15 11:43

21-30 of Total 31

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.