FAQ - Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ EZ-Test Series ]

21-27 of Total 27

≪ 3 / 3page ≫

  • (EZ-Test) Setting Crosshead Stroke Limits

    To prevent the crosshead (or attached load cells or jigs) from colliding with anything, secureupper and lower limit collars at respective crosshead upper and... Show Detail

    • No：7699
    • Date of Issue：2022/01/20 13:29

  • (EZ-Test) Attaching Specimens (Bending Test)

    1. Adjust the distance between supports. 2. Place the specimen in the center of thesupports. 3. Use jog operations to move the bendingpunch a little above ... Show Detail

    • No：7701
    • Date of Issue：2022/01/20 13:37

  • (EZ-Test) Inspection of Safety Equipment

    1.While pressing a jog button to move the crosshead, press the emergency stop button. 2.The crosshead should stop and not restart, even if the jog button is... Show Detail

    • No：7703
    • Date of Issue：2022/01/20 14:07
    • Brached FAQ

  • (EZ-Test) Inspection of Test Force

    Check wheter the test force is approximately correct or not. 1. Prepare the test force calibration jig. 2. Insert the joint for UJ into the bo ttom... Show Detail

    • No：7705
    • Date of Issue：2022/01/20 14:21
    • Last Updated：2022/01/20 14:35

  • (EZ-Test) Inspection of Stroke Speed

    1. Display the jog speed setting screen by selecting the [System] - [Jog Speed], and make a note ofthe current jog speed. 2.Set the jog speed to 6mm/min. ... Show Detail

    • No：7707
    • Date of Issue：2022/01/20 14:30

  • (EZ-Test) Maintenance of EZ-Test

    1. Operating Panel [Operation Buttons]:Clean with a slighyly wet soft cloth. [VFD Display]:Clean with a slighyly wet soft cloth. 2. Main Frame [Tabl... Show Detail

    • No：7710
    • Date of Issue：2022/01/20 14:38

  • (EZ-Test) Jog Operations

    [JOG UP]and [JOG DOWN] buttons move the crosshead as long as they are pressed. Thecrosshead stops when the button is released. Pressing the [HIGH SPEED] but... Show Detail

    • No：8041
    • Date of Issue：2022/01/27 14:39

21-27 of Total 27

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.