Check that presence of the optional device has beenregistered correctly. Some types of optional devices requirerestart o

• The load cell is not recognized. Turn off the power, checkthat the calibration cable is connected appropriately, andtu

No key input is accepted while the instrument is startingup. Wait until the startup is completed.

Active keys are limited during a test or when a computeris connected. Try again after a test ends or when acomputer is n

• Overload may have occurred in the motor. • Check that noforeign matter is caught between the crosshead and table.

Overload may have occurred in the motor. Check whetherthe instrument is used within the working limits. (Max. tenhour

• Check that the emergency stop switch is not active. • Check that the crosshead limit switches are not active. • The

There may be leakage inside the instrument. Immediatelystop using the instrument andcontact a Shimadzu sales or service

There may be leakage inside the instrument. Immediatelystop using the instrument and contact a Shimadzu sales or service

• Check that the breaker of the distribution board is on. • Check that the power supply cable is not loose.

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Materials Testing & Inspection > Autograph(AG) > AGX-V Series

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ AGX-V Series ]

21-30 of Total 31

≪ 3 / 4page ≫

(AGX-V) An optional device does not operate

Check that presence of the optional device has beenregistered correctly. Some types of optional devices requirerestart of the instrument. Turn off the instru... Show Detail
- No：8091
- Date of Issue：2020/12/02 14:16
(AGX-V) The test force display is "- - - -"

• The load cell is not recognized. Turn off the power, checkthat the calibration cable is connected appropriately, andturn on the power again. • If the type... Show Detail
- No：8089
- Date of Issue：2020/12/02 14:16
(AGX-V) No key input is accepted

No key input is accepted while the instrument is startingup. Wait until the startup is completed. Show Detail
- No：8087
- Date of Issue：2020/12/02 14:16
(AGX-V) Some keys do not accept input

Active keys are limited during a test or when a computeris connected. Try again after a test ends or when acomputer is not connected. When a computer is conn... Show Detail
- No：8085
- Date of Issue：2020/12/02 14:16
(AGX-V) A servo error occurs during movement in the jog o...

• Overload may have occurred in the motor. • Check that noforeign matter is caught between the crosshead and table. • Check that no foreign matter is win... Show Detail
- No：8083
- Date of Issue：2020/12/02 14:16
(AGX-V) A servo error occurs during a test

Overload may have occurred in the motor. Check whetherthe instrument is used within the working limits. (Max. tenhours continuous operation, max. 1,000 re... Show Detail
- No：8081
- Date of Issue：2020/12/02 14:16
(AGX-V) The motor does not operate

• Check that the emergency stop switch is not active. • Check that the crosshead limit switches are not active. • The motor does not operate while the inst... Show Detail
- No：8079
- Date of Issue：2020/12/02 14:16
(AGX-V) The leakage breaker of the distribution board is ...

There may be leakage inside the instrument. Immediatelystop using the instrument andcontact a Shimadzu sales or service representative. Show Detail
- No：8077
- Date of Issue：2020/12/02 14:16
(AGX-V) The leakage breaker of the instrument is activated

There may be leakage inside the instrument. Immediatelystop using the instrument and contact a Shimadzu sales or service representative. Show Detail
- No：8075
- Date of Issue：2020/12/02 14:16
(AGX-V) The instrument does not turn on

• Check that the breaker of the distribution board is on. • Check that the power supply cable is not loose. Show Detail
- No：8073
- Date of Issue：2020/12/02 14:16

21-30 of Total 31

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.