If you notice smoke, a burnt smell, or anything else unusual, take the following steps. Before using the instrument aga

• Maintenance 1. Turn OFF the power to the hardness tester and the motorized micrometer kit controllerBOX. 2. Turning

Problem1:The program does notstart up. Cause1:Part of the program was deleted, orthe folder was changed. Solution1

PartNumber:347-24149-02LED LAMP ASSY 1. Remove the top cover fastening screws, and remove the top cover. 2. Remo

Part Number:347-20344VICKERS INDENTOR 100D Part Number:340-06619-07STD TEST BLOCK HMV-700 1. Problems with the

Follow the procedure below if the indentation is offset from the center of the field of view. • HMV-G30, HMV-G2

1. Looking through the objective lens with the lower magnification, adjust the lens until thesample indentation is in fo

If the indentation is not positioned at the center of the field of view, as in below,adjust the positioning as "Centerin

When the focus is adjusted with the microscope, and the indenter is rotated by the turretin preparation for testing, the

After adjusting the focus using the microscope, if the indenter touches the sample whenthe turret rotates, the indenter

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Materials Testing & Inspection > Hardness Tester > Micro Hardness Tester(HMV)

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Micro Hardness Tester(HMV) ]

1-10 of Total 25

≪ 1 / 3page ≫

(HMV) In an Emergency

If you notice smoke, a burnt smell, or anything else unusual, take the following steps. Before using the instrument again, inspect it and, if necessary, con... Show Detail
- No：7471
- Date of Issue：2021/12/06 09:44
(HMV) Maintenance and Inspection (HMV-G-MM)

• Maintenance 1. Turn OFF the power to the hardness tester and the motorized micrometer kit controllerBOX. 2. Turning the knob of the motorized micrometer ... Show Detail
- No：7472
- Date of Issue：2021/12/06 09:44
(HMV) Troubleshooting (HMV-G-MM)

Problem1:The program does notstart up. Cause1:Part of the program was deleted, orthe folder was changed. Solution1:Reinstall the program. Pr... Show Detail
- No：7473
- Date of Issue：2021/12/06 09:44
(HMV) Replacing the Illumination Lamp

PartNumber:347-24149-02LED LAMP ASSY 1. Remove the top cover fastening screws, and remove the top cover. 2. Remove the fastening screws. Remove the l... Show Detail
- No：7474
- Date of Issue：2021/12/06 10:05
(HMV) Adjusting the Diamond Indenter Attachment

Part Number:347-20344VICKERS INDENTOR 100D Part Number:340-06619-07STD TEST BLOCK HMV-700 1. Problems with the Shape of the Indentation If the sh... Show Detail
- No：7475
- Date of Issue：2021/12/06 10:05
(HMV) Centering the Indentation

Follow the procedure below if the indentation is offset from the center of the field of view. • HMV-G30, HMV-G20 1. Turn the left and right index... Show Detail
- No：7476
- Date of Issue：2021/12/06 10:05
(HMV) Identical Focus Adjustment (When two or more object...

1. Looking through the objective lens with the lower magnification, adjust the lens until thesample indentation is in focus. 2. Switch to the other objectiv... Show Detail
- No：7477
- Date of Issue：2021/12/06 10:05
(HMV)If the indentation is not positioned at the center o...

If the indentation is not positioned at the center of the field of view, as in below,adjust the positioning as "Centering theIndentation". Click here for ... Show Detail
- No：7498
- Date of Issue：2021/12/06 10:05
(HMV) If the indenter height is abnormal

When the focus is adjusted with the microscope, and the indenter is rotated by the turretin preparation for testing, the indenter height will need to be adju... Show Detail
- No：7499
- Date of Issue：2021/12/06 10:05
(HMV) If the tip of the indenter is too close to the sample

After adjusting the focus using the microscope, if the indenter touches the sample whenthe turret rotates, the indenter setscrew may be loose. Follow the pro... Show Detail
- No：7500
- Date of Issue：2021/12/06 10:05

1-10 of Total 25

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.