FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection > Hardness Tester
Keyword Search
Frequently Referenced FAQ
FAQ within [ Hardness Tester ]
-
If you notice smoke, a burnt smell, or anything else unusual, take the following steps. Before using the instrument again, inspect it and, if necessary, con... Show Detail
- No:7471
- Date of Issue:2021/12/06 09:44
- Category: Micro Hardness Tester(HMV)
-
(HMV) Maintenance and Inspection (HMV-G-MM)
• Maintenance 1. Turn OFF the power to the hardness tester and the motorized micrometer kit controllerBOX. 2. Turning the knob of the motorized micrometer ... Show Detail
- No:7472
- Date of Issue:2021/12/06 09:44
- Category: Micro Hardness Tester(HMV)
-
(HMV) Troubleshooting (HMV-G-MM)
Problem1:The program does notstart up. Cause1:Part of the program was deleted, orthe folder was changed. Solution1:Reinstall the program. Pr... Show Detail
- No:7473
- Date of Issue:2021/12/06 09:44
- Category: Micro Hardness Tester(HMV)
-
If you find an abnormal condition such as smoke or you smell something burning, take the following measures: To restart operation, check the equipment, an... Show Detail
- No:7513
- Date of Issue:2021/12/06 09:44
- Category: Dynamic Ultra-micro Hardness Tester(DUH)
-
(HMV) Replacing the Illumination Lamp
PartNumber:347-24149-02LED LAMP ASSY 1. Remove the top cover fastening screws, and remove the top cover. 2. Remove the fastening screws. Remove the l... Show Detail
- No:7474
- Date of Issue:2021/12/06 10:05
- Category: Micro Hardness Tester(HMV)
-
(HMV) Adjusting the Diamond Indenter Attachment
Part Number:347-20344VICKERS INDENTOR 100D Part Number:340-06619-07STD TEST BLOCK HMV-700 1. Problems with the Shape of the Indentation If the sh... Show Detail
- No:7475
- Date of Issue:2021/12/06 10:05
- Category: Micro Hardness Tester(HMV)
-
(HMV) Centering the Indentation
Follow the procedure below if the indentation is offset from the center of the field of view. • HMV-G30, HMV-G20 1. Turn the left and right index... Show Detail
- No:7476
- Date of Issue:2021/12/06 10:05
- Category: Micro Hardness Tester(HMV)
-
(HMV) Identical Focus Adjustment (When two or more object...
1. Looking through the objective lens with the lower magnification, adjust the lens until thesample indentation is in focus. 2. Switch to the other objectiv... Show Detail
- No:7477
- Date of Issue:2021/12/06 10:05
- Category: Micro Hardness Tester(HMV)
-
(HMV)If the indentation is not positioned at the center o...
If the indentation is not positioned at the center of the field of view, as in below,adjust the positioning as "Centering theIndentation". Click here for ... Show Detail
- No:7498
- Date of Issue:2021/12/06 10:05
- Category: Micro Hardness Tester(HMV)
-
(HMV) If the indenter height is abnormal
When the focus is adjusted with the microscope, and the indenter is rotated by the turretin preparation for testing, the indenter height will need to be adju... Show Detail
- No:7499
- Date of Issue:2021/12/06 10:05
- Category: Micro Hardness Tester(HMV)
1-10 of Total 38