FAQ - Frequently Asked Questions
- Products Search > Materials Testing & Inspection
Keyword Search
Materials Testing & Inspection
Frequently Referenced FAQ
FAQ within [ Materials Testing & Inspection ]
-
(AGX-V) No key input is accepted
No key input is accepted while the instrument is startingup. Wait until the startup is completed. Show Detail
- No：8087
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) Some keys do not accept input
Active keys are limited during a test or when a computeris connected. Try again after a test ends or when acomputer is not connected. When a computer is conn... Show Detail
- No：8085
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) A servo error occurs during movement in the jog o...
• Overload may have occurred in the motor. • Check that noforeign matter is caught between the crosshead and table. • Check that no foreign matter is win... Show Detail
- No：8083
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) A servo error occurs during a test
Overload may have occurred in the motor. Check whetherthe instrument is used within the working limits. (Max. tenhours continuous operation, max. 1,000 re... Show Detail
- No：8081
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) The motor does not operate
• Check that the emergency stop switch is not active. • Check that the crosshead limit switches are not active. • The motor does not operate while the inst... Show Detail
- No：8079
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) The leakage breaker of the distribution board is ...
There may be leakage inside the instrument. Immediatelystop using the instrument andcontact a Shimadzu sales or service representative. Show Detail
- No：8077
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) The leakage breaker of the instrument is activated
There may be leakage inside the instrument. Immediatelystop using the instrument and contact a Shimadzu sales or service representative. Show Detail
- No：8075
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
(AGX-V) The instrument does not turn on
• Check that the breaker of the distribution board is on. • Check that the power supply cable is not loose. Show Detail
- No：8073
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
You can return the instrument settings to the factory default when you need to resetthe system parameters to the initial values collectively or when incorrec... Show Detail
- No：8070
- Date of Issue：2020/12/02 14:16
- Category： AGX-V Series
-
Resetting restores all AGS-Xsettings to factory settings. NOTE: • After restoring factory settings, optional devices must be registered, and the sy... Show Detail
- No：7991
- Date of Issue：2020/12/02 14:16
- Category： AGS-X Series
181-190 of Total 211