• The ground is not complete,→ Connect a ground having a resistance of no more than 100 ohms. • There is a large so

• There is alarge change inambient temperature.→ Select a location with as little possible changein temperature. •

• There is a problem with thepump.→ Replace the pump diaphragm orreplace thepump completely. Contact a Shimadzu sales or

Disconnected piping. Broken pump. Check the piping after the pump for disconnection. About the pump manintenance,

Clogged filter. Frozen cooler. Too much throttled needle valve. Mixed dust into the pump. Replace the consumable part

Disabled cooler, drain pump failure. Replace the cunsumable parts. Click here for "Maintenance (Replacement of con

Improper installation of the filter element. Reinstall the filter element correctly. When this is done, check the O-r

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Continuous Monitoring Analysis

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Continuous Monitoring Analysis ]

11-17 of Total 17

≪ 2 / 2page ≫

(GAS) The indicator values fluctuate or exhibit noise (CG...

• The ground is not complete,→ Connect a ground having a resistance of no more than 100 ohms. • There is a large source ofvibration in the vicinity.→ Re... Show Detail
- No：6821
- Date of Issue：2021/08/20 11:25
(GAS) The indicator drifts (CGT-7100)

• There is alarge change inambient temperature.→ Select a location with as little possible changein temperature. • The inner surface of the cell isdirty... Show Detail
- No：6822
- Date of Issue：2021/08/20 11:25
(GAS) Gas does not flow into the flow meter (CGT-7100)

• There is a problem with thepump.→ Replace the pump diaphragm orreplace thepump completely. Contact a Shimadzu sales or service representative. • There... Show Detail
- No：6823
- Date of Issue：2021/08/20 11:25
(GAS) The gas dose not flow at all (CFP-8000)

Disconnected piping. Broken pump. Check the piping after the pump for disconnection. About the pump manintenance, click here for "Maintenance (Replacem... Show Detail
- No：6824
- Date of Issue：2021/08/20 13:39
(GAS) The gas flows only at 1L/min (CFP-8000)

Clogged filter. Frozen cooler. Too much throttled needle valve. Mixed dust into the pump. Replace the consumable parts. Click here for "Maintenance (Re... Show Detail
- No：6825
- Date of Issue：2021/08/20 13:39
(GAS) The water drops from the gas outlet (CFP-8000)

Disabled cooler, drain pump failure. Replace the cunsumable parts. Click here for "Maintenance (Replacement of consumables)". Show Detail
- No：6826
- Date of Issue：2021/08/20 13:39
(GAS) The indication of the connected analyzer is too low...

Improper installation of the filter element. Reinstall the filter element correctly. When this is done, check the O-ring for any damage. Click here for... Show Detail
- No：6827
- Date of Issue：2021/08/20 13:39

11-17 of Total 17

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Communication Inc.