FAQ - Frequently Asked Questions
Keyword Search
Frequently Referenced FAQ
FAQ within [ Error/Warning ]
-
SCD detector abs. press is high [Error Code:9079]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No:5860
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 12:56
-
xxx sensor error [Error Code:1026 1027 1028 1029 1030 103...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No:5859
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 12:55
-
xxx sensor is down [Error Code:1018 1019 1020 1021 1022 1...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No:5858
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 12:54
-
xxx sensor is short circuit [Error Code:1010 1011 1012 10...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No:5857
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:47
-
SCD furnace abs. press was exceeded upper limit [Error Co...
Replace the inner pyrotube. MaintenanceHelp_SCD-Inner-Pyrotube-Replacement.pdf If the error is displayed even after the tube is replaced, turn off ... Show Detail
- No:5856
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:45
-
SCD furnace abs. press fell below lower limit [Error Code...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No:5855
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:44
-
SCD furnace temperature set point not reached [Error Code...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No:5854
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:42
-
SCD furnace temperature controller error [Error Code:6105]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No:5853
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:40
-
SCD furnace temperature exceeds the limit [Error Code:6104]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No:5852
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:38
-
SCD furnace temperature sensor error [Error Code:6103]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No:5851
- Date of Issue:2021/05/18 15:38
- Last Updated:2021/06/04 11:36
11-20 of Total 221