FAQ - Frequently Asked Questions
- Products Search > GC > GC-2030
Keyword Search
GC-2030
Frequently Referenced FAQ
FAQ within [ GC-2030 ]
-
INJ1-DET2 relay error [Error Code:1046]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5864
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 13:06
- Category： Error/Warning
-
COL relay error [Error Code:1045]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5863
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 13:05
- Category： Error/Warning
-
Power controller board com. failed [Error Code:4045]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5862
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 13:00
- Category： Error/Warning
-
DET#1 2 3 4 FPD cooling fan error [Error Code:4121 4122 4...
Turn off the main power of the instrument and check the installation status of the cooling fan. If it is installed correctly, the hardware fails. Turn off ... Show Detail
- No：5861
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 14:04
- Category： Error/Warning
-
SCD detector abs. press is high [Error Code:9079]
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5860
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 12:56
- Category： Error/Warning
-
xxx sensor error [Error Code:1026 1027 1028 1029 1030 103...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5859
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 12:55
- Category： Error/Warning
-
xxx sensor is down [Error Code:1018 1019 1020 1021 1022 1...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5858
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 12:54
- Category： Error/Warning
-
xxx sensor is short circuit [Error Code:1010 1011 1012 10...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative. Show Detail
- No：5857
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 11:47
- Category： Error/Warning
-
SCD furnace abs. press was exceeded upper limit [Error Co...
Replace the inner pyrotube. MaintenanceHelp_SCD-Inner-Pyrotube-Replacement.pdf If the error is displayed even after the tube is replaced, turn off ... Show Detail
- No：5856
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 11:45
- Category： Error/Warning
-
SCD furnace abs. press fell below lower limit [Error Code...
Turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative to ask for part replacement. Show Detail
- No：5855
- Date of Issue：2021/05/18 15:38
- Last Updated：2021/06/04 11:44
- Category： Error/Warning
11-20 of Total 225