The analysis (escape) depth will differ depending on the elements, so it is not easy to specify. As a guideline: •Thick

• The energy axis is entirely off the profiles. • Calibrate the instrument.

Do you perform drift correction? If you are using a calibration curve from a few years ago, it is better to revise the c

• With the EDX, compounds cannot be distinguished. Perform screening analysis with respect to total Br content. • If k

These are spectral line names.Multiple lines are generated by a single element. Indicate:Siegbahn notation FeKa: FeKα F

Analysis cannot proceed as far as the resin on the opposite side. (1) The ceramic is in the middle, so X-ray intensity f

If a Mylar film is used, the Mg intensity will be significantly reduced. Either use a polypropylene film or a pressure m

Use a micro X-cell. If there is enough sample to extend at least 5mm from the bottom, then the thickness will be suffici

Use the filter instillation method for the analysis. In the filter instillation method, droplets of a liquid are dripped

The ClKα line overlaps with the RhLα line originating from the X-ray tube. As a result, trace quantities of Cl cannot be

FAQ - Frequently Asked Questions

Font Size
S
M
L

Products Search > Elemental Analysis > Energy Dispersive X-ray Fluorescence Spectroscopy(EDX)

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Energy Dispersive X-ray Fluorescence Spectroscopy(EDX) ]

11-20 of Total 35

≪ 2 / 4page ≫

(EDX) Thickness of plating film thickness measurement

The analysis (escape) depth will differ depending on the elements, so it is not easy to specify. As a guideline: •Thick films: Several μm to several doze... Show Detail
- No：5695
- Date of Issue：2021/04/28 13:44
- Last Updated：2021/05/20 08:56
(EDX) Peaks are detected, but only dotted lines do not id...

• The energy axis is entirely off the profiles. • Calibrate the instrument. Show Detail
- No：5693
- Date of Issue：2021/04/28 13:42
- Last Updated：2021/05/20 08:55
(EDX) In standard sample analysis, there was a large devi...

Do you perform drift correction? If you are using a calibration curve from a few years ago, it is better to revise the calibration curve. Show Detail
- No：5691
- Date of Issue：2021/04/28 13:41
- Last Updated：2021/05/20 08:54
(EDX) Is it possible to distinguish PBB and PBDE with EDX?

• With the EDX, compounds cannot be distinguished. Perform screening analysis with respect to total Br content. • If knowing the total Brcontent of a sa... Show Detail
- No：5689
- Date of Issue：2021/04/28 13:40
- Last Updated：2021/05/20 08:52
(EDX) What is mean of Ka and Kb in quantitative profile

These are spectral line names.Multiple lines are generated by a single element. Indicate:Siegbahn notation FeKa: FeKα FeKb: FeKβ FeLa: FeLα FeLb1: FeL... Show Detail
- No：5687
- Date of Issue：2021/04/28 13:36
- Last Updated：2022/06/24 16:15
(EDX) Ceramic plate sample analysis in resin film

Analysis cannot proceed as far as the resin on the opposite side. (1) The ceramic is in the middle, so X-ray intensity from the resin on the opposite side w... Show Detail
- No：5685
- Date of Issue：2021/04/28 13:33
- Last Updated：2021/05/20 08:49
(EDX) Mylar film and "Mg" analysis

If a Mylar film is used, the Mg intensity will be significantly reduced. Either use a polypropylene film or a pressure molded briquette. Show Detail
- No：5683
- Date of Issue：2021/04/28 13:32
- Last Updated：2021/05/20 08:48
(EDX) Thickness of powder sample

Use a micro X-cell. If there is enough sample to extend at least 5mm from the bottom, then the thickness will be sufficient. If the thickness is less than ... Show Detail
- No：5681
- Date of Issue：2021/04/28 13:30
- Last Updated：2021/05/20 08:47
(EDX) "Na" analysis in aqueous solution (without He subst...

Use the filter instillation method for the analysis. In the filter instillation method, droplets of a liquid are dripped on to a filter paper. Then they are... Show Detail
- No：5679
- Date of Issue：2021/04/28 13:29
- Last Updated：2021/05/20 08:46
(EDX) Cl detection in "Easy" analysis

The ClKα line overlaps with the RhLα line originating from the X-ray tube. As a result, trace quantities of Cl cannot be detected with a easy analysis method... Show Detail
- No：5677
- Date of Issue：2021/04/28 13:28
- Last Updated：2021/05/20 08:44

11-20 of Total 35

To Top of Page

This site uses the FAQ system "PKSHA FAQ", which is a product of PKSHA Technology Inc.