Frequently Asked Questions

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search by keyword or text, within 200 characters. 
Separate keywords with sapce to search for ALL.
Separate with "｜" to search for EITHER words.
And having "-" at the start of the word will EXCLUDE it.

Frequently Referenced FAQ

Latest FAQ

FAQ within [ FTIR Spectroscopy(FT-IR) ]

1-10 of Total 21

≪ 1 / 3page ≫

  • (FTIR) FTIR Analysis Basic Qestion

    Click here forFTIR Analysis Basic Qestion. The following Q & A is described. Q: Is FTIR affected by the environment? Q: How deep does the infrared... Show Detail

    • No：4913
    • Displayed Date：2021/02/02 08:54

  • (FTIR) Suitable Locations and Prepara...

    Operation guarantee temperature range:10 to 35 ºC, within the temperature fluctuation range ±2 ºC/h Installationtemperature range: • IRSpirit: 10 to 35... Show Detail

    • No：4912
    • Displayed Date：2021/01/27 21:40
    • Updated DTM：2021/03/23 13:15

  • (FTIR) IRTracer-100 Replacement of Be...

    The scan wavenumber range of the IRTracer-100 can be changed by switching the beam splitter unit. If it is expected that the main power supply will be off fo... Show Detail

    • No：4911
    • Displayed Date：2021/01/27 21:25

  • (FTIR) IRSpirit Wavenumber Calibration

    Execute Wavenumber calibration of IRSpirit using peaks of carbon dioxide and water vapor. FTIR spectrum is described with wavenumber unit. Since wavenumber ... Show Detail

    • No：4909
    • Displayed Date：2021/01/27 20:50

  • (FTIR) Power Spectrum Becomes too Sma...

    Reason 1. Deterioration because of long term use 2. Trouble with the power board 3. Trouble with the detector Solution 1. Deterioration becaus... Show Detail

    • No：4908
    • Displayed Date：2021/01/27 20:30

  • (FTIR) A Part of the Mirror Is a Litt...

    Reason It seems to be the result of the heat of the infrared light source for an extended time. Solution Conduct the performance check according t... Show Detail

    • No：4907
    • Displayed Date：2021/01/27 20:30

  • (FTIR) The signal intensity of the po...

    Reason 1. The light source is broken. 2. The fuse has blown. 3. Selection of the detector is wrong. 4. Something that intercepts the light path is in... Show Detail

    • No：4906
    • Displayed Date：2021/01/27 20:30

  • (FTIR) Installation of Sample Compart...

    It needs to be replaced by our service personnel. Please contact a Shimadzu sales or service representative. 1. Remove the Sample compartment window hold... Show Detail

    • No：4910
    • Displayed Date：2021/01/27 10:38
    • Brached FAQ

  • (FTIR) Self Diagnostics

    • The IRAffinity-1 series has a self-diagnosis function. The IRAffinity-1 series automatically checks its own status during operation or startup. When all it... Show Detail

    • No：4905
    • Displayed Date：2021/01/27 10:38
    • Brached FAQ

  • (FTIR) Start-Up Inspection

    • Dry Indicator Check(This check must be done before turning ON.) Click here for Dry Indicator, Humidity Lamp. • Silica Gel Check(This check must b... Show Detail

    • No：4904
    • Displayed Date：2021/01/27 10:38
    • Brached FAQ

1-10 of Total 21

To Top of Page

This site uses the FAQ system "OKBIZ. for FAQ", which is a product of PKSHA Communication Inc.