• Standard Sample • Sample Pot (For DI: Direct Sample Inlet Device) • Rotary Pump Oil

• Ion Source for TQ8050 (NX)/ TQ8040 (NX)/ TQ8030/ QP2020 (NX)/ QP2010 ultra/ QP2010 Plus Appearance •

• Injection port septum • Glass inserts (for capillary column) • Glass insert parts •

This section describes how to check the instrument for leaks. If an air leak is clearly present, locate the leak as desc

1. Cut the deactivated fused silica tube (guard column) to approx. 2 m. 2. Using the capillary cutter, cut t

1. Automatically stop the GC/MS. Wait until the "system shutdown" message appears. 2.Pull the column oven

Replace the reagent gas cylinder by following the procedure below. The instrument need not be stopped to perform this pr

Parts Number: 225-01242-91: PLUG ASSY (Use it as a stopper when the DI-2010 is not used.) 225-10653-91: POSITIONIN

Parts Number: 017-30163-11 PUMP OIL,H11026015 (1L) 0.28L is necessary for each replacement. When performing anal

Parts Number: 225-09493-03: STANDARD SAMPLE, PFTBA (5G) WITH REPORT 225-01559-91: CAPILLARY ASSY 225-04257-91:

Frequently Asked Questions

Font Size
S
M
L

Products Search > GC-MS > Maintenance

Keyword Search

Frequently Referenced FAQ

Latest FAQ

FAQ within [ Maintenance ]

1-10 of Total 13

≪ 1 / 2page ≫

(GCMS) Consumables(Other)

• Standard Sample • Sample Pot (For DI: Direct Sample Inlet Device) • Rotary Pump Oil Show Detail
- No：6481
- Displayed Date：2021/06/23 17:28
(GCMS) Consumables(Ion Source)

• Ion Source for TQ8050 (NX)/ TQ8040 (NX)/ TQ8030/ QP2020 (NX)/ QP2010 ultra/ QP2010 Plus Appearance • Ion Source for QP2010 SE/ QP2010/ PA... Show Detail
- No：6479
- Displayed Date：2021/06/23 17:17
(GCMS) Consumables(Injection)

• Injection port septum • Glass inserts (for capillary column) • Glass insert parts • Silica wool Show Detail
- No：6476
- Displayed Date：2021/06/23 17:07
(GCMS) Checking for Leaks

This section describes how to check the instrument for leaks. If an air leak is clearly present, locate the leak as described in "2. MS Vacuum Leak Check", a... Show Detail
- No：4705
- Displayed Date：2020/12/17 15:41
(GCMS) Guard Column Installation

1. Cut the deactivated fused silica tube (guard column) to approx. 2 m. 2. Using the capillary cutter, cut the connecting sections of the guard c... Show Detail
- No：7236
- Displayed Date：2020/12/17 10:18
(GCMS) Column Replacement

1. Automatically stop the GC/MS. Wait until the "system shutdown" message appears. 2.Pull the column oven door latch toward you. 3.... Show Detail
- No：7234
- Displayed Date：2020/12/17 10:18
(GCMS) Reagent Gas Cylinder Replacement Procedure

Replace the reagent gas cylinder by following the procedure below. The instrument need not be stopped to perform this procedure. 1. Click [Tuning] on ... Show Detail
- No：4687
- Displayed Date：2020/12/17 10:18
(GCMS) DI-2010 PTFE Seal and O-Ring Replacement Procedure

Parts Number: 225-01242-91: PLUG ASSY (Use it as a stopper when the DI-2010 is not used.) 225-10653-91: POSITIONING JIG (Tool to adjust the position of... Show Detail
- No：4694
- Displayed Date：2020/12/15 14:45
(GCMS) Rotary Pump Oil Replacement Procedure

Parts Number: 017-30163-11 PUMP OIL,H11026015 (1L) 0.28L is necessary for each replacement. When performing analysis using regular EI ionization, rep... Show Detail
- No：4693
- Displayed Date：2020/12/15 14:45
(GCMS) Standard Reagent (PFTBA) Addition Procedure

Parts Number: 225-09493-03: STANDARD SAMPLE, PFTBA (5G) WITH REPORT 225-01559-91: CAPILLARY ASSY 225-04257-91: GLASS BOTTLE(5 PCS) 036-11203-84:O... Show Detail
- No：4695
- Displayed Date：2020/12/15 09:53

1-10 of Total 13

To Top of Page

This site uses the FAQ system "OKBIZ. for FAQ", which is a product of PKSHA Communication Inc.